Technical parameters of experimental equipment:
Conforming to GB/T2423.17 GB/T10125-1997 GB10587 GB6460 GB1771 ASTM-B117 GJB150
DIN50021-75 ISO3768、3769、3770 CNS 3627、3885、4159、7669、8866
JISD-0201, H-8502, H-8610, K-5400, Z-2371 and other standards
Model YWX-150
Studio size D× W× H 450× 600× four hundred
Overall dimension D× W× H 560× 1140× one thousand
Power 1.8 (kw)
Performance index temperature range: room temperature+5 ℃~55 ℃
Temperature uniformity&le& plusmn; 2℃
Temperature fluctuation&le& plusmn; 0.5℃
Salt fog sedimentation 1~2ml/80cm2. h
Continuous spray mode and optional cycle
Test timing 1~999 (S, M, H) adjustable
Temperature and humidity operation control system Temperature control LED digital display P, I, D+S, S, R. Microcomputer integrated controller
Temperature sensor platinum resistance. PT100&Omega/ MV
Fully independent heating system, nickel-chromium alloy electric heating heater
Spray system tower spray device with non crystallization nozzle (finer and evenly distributed particles)
Spray time 1~99 (SMH) and cycle adjustable
The temperature and humidity in the box are equipped with a temperature and humidity mercury thermometer
Standard funnel and standard metering cylinder for salt liquid collection
Water quality filter shall be installed at the suction pipe of salt solution filtration (to prevent nozzle blockage and terminate the test)
The temperature of salt solution preheating is balanced with the temperature in the tank (the low temperature of salt solution will not affect the test temperature)
Material: box material: imported corrosion-resistant, anti-aging, high-strength P.V.C plate
The inner box is made of imported corrosion-resistant and high-strength P.V.C
The box cover is made of imported corrosion-resistant, high-strength transparent P.V.C
Anti-corrosion and high-temperature resistant materials for other accessories
Standard configuration: 1 set of round bar, 1 set of V-shaped sample holder, 2 nozzles, 2 funnels and 2 sets of measuring cylinders
Safety protection leakage, short circuit, overtemperature, water shortage, end of test, overcurrent protection
Power supply voltage AC220V± 10%50Hz/AC380V± 10%50Hz AC380V± 10%50Hz
Operating ambient temperature 5 ℃~+30 ℃≤ 85%R.H
Water seal structure is adopted for sealing, without salt mist overflow
This technical information is subject to change without notice