General Specifications
Item | Contents | Unit |
Size | 2.4TFT | inch |
LCM Dimension | 42.72(W)* 60.26(H) * 2.30(T) | mm |
LCD Active Area | 36.72* 48.96 | mm |
Number OfDots | 240 * RGB * 320 | pixel |
LCD Type | a-Si TFT |
|
Viewing Direction | 12 O'CLOCK |
|
Driver IC | ST7789V |
|
Interface Type | SPI |
|
Operating Temperature | -20℃~ 70℃ |
|
Storage Temperature | -30℃~ 80℃ |
|
Backlight Type | 4 LEDs |
|
Weight | TBD |
NO. | Symbol | Description |
1 | GND | Ground |
2 | RS | Destination register selection. |
3 | CS | Chip Select |
4 | SCL | Serial Clock |
5 | SDA | Serial Data Input |
6 | RESET | Reset pin |
7 | VCC | POWER SUPPLY |
8 | GND | Ground |
9 | LEDA | BACKLIGHT ANODE |
10 | LEDK | BACKLIGHT CATHODE |
Electrical Specification
Item | Symbol | Min | Typ | Max | Unit |
TFT gate on voltage | VGH | 13 | 15 | -- | V |
TFT gate off voltage | VGL | -- | -10 | -- | V |
TFT common electrode Voltage | Vcom | -- | -1 | -- | V |
Typical Operation Conditions
Item | Symbol | Min. | Typ. | Max. | Unit |
Analog Supply Voltage | VCI | 2.5 | 2.8 | 3.3 | V |
Digital Supply Voltage | VDD | 2.5 | 2.8 | 3.3 | V |
I/O Supply Voltage | IOVCC | 1.65 | 1.8/2.8 | 3.3 | V |
Input High Voltage | VIH | 0.8*IOVCC | - | IOVCC | V |
Input Low Voltage | VIL | 0 | - | 0.2*IOVCC | V |
Output High Voltage | VOH | 0.8*IOVCC | - | - | V |
Output Low Voltage | VOL | - | - | 0.2*IOVCC | V |
Backlight Circuit Characteristics
Item | Symbol | Min. | Typ. | Max. | Unit |
LED Current | IB | -- | 60 | 80 | mA |
LED Voltage | Vf | 2.8 | 3.0 | 3.2 | V |
CIE | X | 0.265 | 0.295 | 0.325 |
|
Y | 0.26 | 0.29 | 0.32 |
| |
Brightness of LCM | L |
| 300 |
| cd/m2 |
Test Item |
Test Condition | Test result determinant gist |
High temperature |
80±3 ℃,48H; | Inspection after 2~4hours |
storage | storage at room | |
| temperature, | |
Low temperature |
-30±3 ℃,48H; |
the sample shall be free from |
storage | defects: | |
High temperature |
70±3 ℃,48H; |
|
operation |
| |
Low temperature |
-20±3 ℃,48H; |
|
operation |
| |
High temperature |
60℃±3 ℃,90%±3%RH ,48H; |
|
/humidity |
1.Air bubble in the LCD; | |
Thermal Shock | -20℃/0.5h~+70℃/0.5h |
|
for a total 24 cycles; |
2.Non-display; | |
Vibration Test | Frequency 10Hz~55Hz~10Hz |
3.Glass crack; |
Amplitude:1.5mm, X,Y,Z | 4. The electrical | |
direction for total 1H; | characteristics requirements | |
(Packing condition) | shall be satisfied. | |
ESD test | ±4KV, Human Body Mode, |
|
150pF/330Ω; |
| |
±8KV, Air Mode, 150pF/330Ω; |