K220A24101 is a 2.2 inch lcd display screen with optional resistive touch screen and capacitive touch screen control with a resolution of 176×220 pixels. This size TFT LCD display is portrait mode with wider viewing angle by POL adjustment, left: 45/right: 45/up: 45/down: 20 degrees (typical).Optional RTP or CTP.
This K220A24101 module has built-in ILI9225G controller IC, supports MCU interface, the power supply voltage (VCC) range is 3.0V to 3.6V, the brightness is 380 nits (typ), and the contrast ratio is 800:1. This module is a handheld device, home Ideal for industries such as electrical appliances. The module can operate at temperatures from -20°C to +70°C; its storage temperature range is -30°C to +80°C.
Item | Contents | Unit |
Size | 2.2 | inch |
LCM Dimension | 40.20(W)* 55.60(H) * 2.35(T) | mm |
LCD Active Area | 34.85* 43.56 | mm |
Number Of Dots | 176×220 | pixel |
LCD Type | a-Si TFT | |
Viewing Direction | 12 o’clock | |
Driver IC | ILI9225G | |
Interface Type | MCU | |
Operating Temperature | -20℃~ 70℃ | |
Storage Temperature | -30℃~ 80℃ | |
Backlight Type | 4 LEDs | |
Brightness | 390 | cd/m2 |
NO. | Symbol | Description |
1 | GND | Ground |
2 | VDD | POWER SUPPLY |
3 | RESET | Reset pin |
4 | CS | Chip enable, Low-active. |
5 | RS | Data/Command register address. |
6 | WR | Write signal, rising-edge-trigger. |
7 | RD | Read signal, rising-edge-active. |
8 | IM0 | I/O choose |
9 | GND | Ground |
10 | VDD | POWER SUPPLY |
11 | DB8 | Data Bus |
12 | DB9 | Data Bus |
13 | DB10 | Data Bus |
14 | DB11 | Data Bus |
15 | DB12 | Data Bus |
16 | DB13 | Data Bus |
17 | DB14 | Data Bus |
18 | DB15 | Data Bus |
19 | GND | Ground |
20 | GND | Ground |
21 | LEDK3 | BACKLIGHT CATHODE |
22 | LEDK2 | BACKLIGHT CATHODE |
23 | LEDK1 | BACKLIGHT CATHODE |
24 | LEDA | BACKLIGHT ANODE |
Item | Symbol | Min | Typ | Max | Unit |
TFT gate on voltage | VGH | — | 15 | — | V |
TFT gate off voltage | VGL | — | -7.5 | — | V |
TFT common electrode Voltage | Vcom | — | -1 | — | V |
Item | Symbol | Min. | Typ. | Max. | Unit |
Analog Supply Voltage | VCI | 2.5 | 2.8 | 3.3 | V |
Digital Supply Voltage | VDD | 2.5 | 2.8 | 3.3 | V |
I/O Supply Voltage | IOVCC | 1.65 | 1.8/2.8 | 3.3 | V |
Input High Voltage | VIH | 0.8*IOVCC | – | IOVCC | V |
Input Low Voltage | VIL | 0 | – | 0.2*IOVCC | V |
Output High Voltage | VOH | 0.8*IOVCC | – | – | V |
Output Low Voltage | VOL | – | – | 0.2*IOVCC | V |
Item | Symbol | Min. | Typ. | Max. | Unit |
LED Current | IB | — | 60 | 80 | mA |
LED Voltage | Vf | 2.8 | 3.0 | 3.2 | V |
CIE | X | 0.265 | 0.295 | 0.325 | |
Y | 0.26 | 0.29 | 0.32 | ||
Brightness of LCM | L | — | 390 | — | cd/m2 |
Test Item | Test Condition | Test result determinant gist |
High temperature storage | 80±3 ℃,48H; | |
Low temperature storage | ~30±3 ℃,48H; | |
High temperature storage | 70±3 ℃,48H; | Inspection after 2~4hours storage at roomtemperature, |
Low temperature operation | ~20±3 ℃,48H; | the sample shall be free from defects: |
High temperaturehumi/dity | 60℃±3 ℃,90%±3%RH ,48H; | 1.Air bubble in the LCD; |
Thermal Shock | ~20℃/0.5h~+70℃/0.5h for a total 24 cycles; | 2.Non-display; |
Vibration Test | Frequency 10Hz~55Hz~10Hz | 3.Glass crack; |
Amplitude:1.5mm, X,Y,Z | ||
direction for total 1H; | 4. The electrical | |
(Packing condition) | ||
ESD test | ±4KV, Human Body Mode, | characteristics requirements shall be satisfied. |
150pF/330Ω; | ||
±8KV, Air Mode, 150pF/330Ω; |