H20I2201 is a 2.0 inch tft display screen with optional resistive touch screen and capacitive touch screen control with a resolution of 240×320 pixels. This size TFT LCD monitor is in portrait mode, TFT panel adopts IPS panel, left: 85/right: 85/up: 85/down: 85 degrees (typical).Optional RTP or CTP.
This H20I2201 inch module has built-in ST7789V controller IC, supports MCU interface, the power supply voltage (VCC) range is 3.0V to 3.6V, the brightness is 380 nits (typical value), and the contrast ratio is 800:1. This module is a household appliance , communication equipment, handheld equipment and other industrial ideals. The module can operate at temperatures from -20°C to +70°C; its storage temperature range is -30°C to +80°C.
Item | Contents | Unit |
Size | 2.0 | inch |
LCM Dimension | 34.70(W)* 47.95(H) * 2.2(T) | mm |
LCD Active Area | 30.60* 40.80 | mm |
Number Of Dots | 240×320 | pixel |
LCD Type | a-Si TFT | |
Viewing Direction | IPS | |
Driver IC | ST7789V | |
Interface Type | MCU | |
Operating Temperature | -20℃~ 70℃ | |
Storage Temperature | -30℃~ 80℃ | |
Backlight Type | 4 LEDs | |
Brightness | 380 | cd/m² |
NO. | Symbol | Description |
1 | LEDA | BACKLIGHT ANODE |
2 | LEDK | BACKLIGHT CATHODE |
3 | NC | NC |
4 | NC | NC |
5 | IOVCC | I/O POWER SUPPLY |
6 | VCC | POWER SUPPLY |
7 | DB7 | Data Bus |
8 | DB6 | Data Bus |
9 | DB5 | Data Bus |
10 | DB4 | Data Bus |
11 | DB3 | Data Bus |
12 | DB2 | Data Bus |
13 | DB1 | Data Bus |
14 | DB0 | Data Bus |
15 | RD | Read signal, rising-edge-active. |
16 | WR | Write signal, rising-edge-trigger. |
17 | RS | Data/Command register address. |
18 | CS | Chip enable, Low-active. |
19 | TE | Frame mark. |
20 | RESET | Reset pin |
21 | GND | Ground |
22 | GND | Ground |
Item | Symbol | Min | Typ | Max | Unit |
TFT gate on voltage | VGH | — | 15 | — | V |
TFT gate off voltage | VGL | — | -10.5 | — | V |
TFT common electrode Voltage | Vcom | — | -1 | — | V |
Item | Symbol | Min. | Typ. | Max. | Unit |
Analog Supply Voltage | VCI | 2.5 | 2.8 | 3.3 | V |
Digital Supply Voltage | VDD | 2.5 | 2.8 | 3.3 | V |
I/O Supply Voltage | IOVCC | 1.65 | 1.8/2.8 | 3.3 | V |
Input High Voltage | VIH | 0.8*IOVCC | – | IOVCC | V |
Input Low Voltage | VIL | 0 | – | 0.2*IOVCC | V |
Output High Voltage | VOH | 0.8*IOVCC | – | – | V |
Output Low Voltage | VOL | – | – | 0.2*IOVCC | V |
Item | Symbol | Min. | Typ. | Max. | Unit |
LED Current | IB | — | 60 | 80 | mA |
LED Voltage | Vf | 2.8 | 3.0 | 3.2 | V |
CIE | X | 0.265 | 0.295 | 0.325 | |
Y | 0.26 | 0.29 | 0.32 | ||
Brightness of LCM | L | 380 | — | cd/m2 |
Test Item | Test Condition | Test result determinant gist |
High temperature storage | 80±3 ℃,48H; | |
Low temperature storage | ~30±3 ℃,48H; | |
High temperature storage | 70±3 ℃,48H; | Inspection after 2~4hours storage at roomtemperature, |
Low temperature operation | ~20±3 ℃,48H; | the sample shall be free from defects: |
High temperaturehumi/dity | 60℃±3 ℃,90%±3%RH ,48H; | 1.Air bubble in the LCD; |
Thermal Shock | ~20℃/0.5h~+70℃/0.5h for a total 24 cycles; | 2.Non-display; |
Vibration Test
| Frequency 10Hz~55Hz~10Hz | 3.Glass crack; |
Amplitude:1.5mm, X,Y,Z | ||
direction for total 1H; | 4. The electrical | |
(Packing condition) | ||
ESD test | ±4KV, Human Body Mode, | characteristics requirements shall be satisfied. |
150pF/330Ω; | ||
±8KV, Air Mode, 150pF/330Ω; |
Search keyword: tft 2.0″, 2.0 tft lcd, 2.0″ tft lcd, 2.0 inch tft lcd, tft lcd 2.0, 2.0 tft display, 2.0″ tft display, 2.0 inch tft display, tft display 2.0, tft display 2.0″,tft lcd display,2.0inch lcd screen,2.0inch display screen,